Cure accelerator for Smooth-On tin cure silicone rubber compounds, used to reduce cure times from overnight to a few hours.

The world's first alginate that does not contain crystalline silica (a known carcinogen). Make single-use molds of the face, hands and other body parts.

Fiber reinforced "non-sag" version of original Alja-Safe™ life casting alginate.

No powder - no dust! Liquid alginate which blends easily with water, creating a unique, skin safe moldmaking material.

Aluminum powder for metal cold casting effects.

Used to opens and re-seal 1 gallon and 5 gallon plastic pails.

Adhesion Promoter For Medical Dressings

Water based, Eco-Friendly concrete release agent that aids in releasing concrete castings from rubber molds and other surfaces.

Quickly and easily repair archery targets using our FlexFoam-iT!™ 15 polyurethane foam.

Black Panther™ 85 is a two-component, fast curing liquid adhesive for repairing holes, tears and splits in steel / fabric corded rubber conveyor belts.

“Apply to Skin” Platinum Silicone Rubber, working time of 90 seconds and a demold time of 7 minutes.

Non-toxic skin conditioner that will aid in releasing Body Double™ mold rubber from skin surfaces with or without hair.

Self-releasing “Apply to Skin” Platinum Silicone Rubber, working time of 6 minutes and a demold time of 20 minutes.

“Apply to Skin” Platinum Silicone Rubber, working time of 5 minutes and a demold time of 20 minutes.

Create a platinum-cure silicone rubber mold of larger surface body parts. Working time of 5 minutes and a demold time of 20 minutes.

Brass powder for metal cold casting effects.

Bronze powder for metal cold casting effects.

Brushable Shore A 35 hardness urethane rubber, 1A:1B mix ratio by volume, 20 minute pot life and 16 hour cure time.

Brushable Shore A 40 hardness urethane rubber, 1A:1B mix ratio by volume, 20 minute pot life and 16 hour cure time.

Brushable Shore A 50 hardness urethane rubber, 1A:1B mix ratio by volume, 20 minute pot life and 16 hour cure time.

Brushable Shore A 60 hardness urethane rubber, 1A:1B mix ratio by volume, 20 minute pot life and 16 hour cure time.

Powders used to add an endless variety of bright metallic, glitter & color effects to finished castings.

Optically Clear UV Resistant Urethane Rubber - Shore A 30 Hardness. 1A:1B By Volume, 15 minute pot life 16 hour cure time.

Optically Clear UV Resistant Urethane Rubber - Shore A 50 Hardness. 1A:2B By weight - scale required, 25 minute pot life 16 hour cure time.

Optically Clear UV Resistant Urethane Rubber - Shore A 95 Hardness. 1A:1.5B By weight - scale required, 25 minute pot life 16 hour cure time.

Non-Inhibiting shore A 45 Hardness urethane rubber, 1A:1B By Volume, 25 minute pot life 16 hour cure time.

Copper powder for metal cold casting effects.

Translucent liquid additive that causes cured silicone rubbers, urethane rubbers, plastics or foams to glow a bright blue under UV light.

Pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.

Used to clean Derma-tac™ adhesive from the skin.

Vacuum de-gassing agent will aid in vacuum degassing urethane plastics and dramatically reduces the time it takes to vacuum material.

Translucent, shore A 10 hardness platinum cure silicone rubber. 8 minute pot life and 75 minute cure time. Meets UL-94HB Flame Certification.

Translucent, shore A 10 hardness platinum cure silicone rubber. 20 minute pot life and 5 hours cure time. Meets UL-94HB Flame Certification.

Translucent, low viscosity, shore A 10 hardness platinum cure silicone rubber. 15 minute pot life and 75 minute cure time.

Translucent, shore A 10 hardness platinum cure silicone rubber. 45 minute pot life and 7 hour cure time. Meets UL-94HB Flame Certification.

Translucent, shore A 10 hardness platinum cure silicone rubber. 4 minute pot life and 30 minute cure time. Meets UL-94HB Flame Certification.

Translucent, shore A 15 hardness platinum cure silicone rubber. 40 minute pot life and 7 hour cure time.

Translucent, shore A 20 hardness platinum cure silicone rubber. 25 minute pot life and 4 hour cure time.

Translucent, low viscosity, shore A 20 hardness platinum cure silicone rubber. 6 minute pot life and 30 minute cure time.

Translucent, shore A 30 hardness platinum cure silicone rubber. 45 minute pot life and 16 hour cure time.

Translucent, shore A 2 hardness platinum cure silicone rubber. 12 minute pot life and 40 minute cure time.

Flame rated UL-94V-O and ASTM E-84, Class A polymer modified gypsum system. 2A:1B by volume mix ratio.

Polymer additive that enhances the physical and performance properties of cementitious materials such as portland cements and mortars.

Flame rating of UL-94V-O and ASTM E-84, Class A polymer additive that greatly enhances the physical properties of alpha gypsum products.

PRODUCT MAY FREEZE IN TRANSIT – order may be delayed due to freezing temperatures.

A unique hand cleaner made for removing unreacted liquid resins from the skin.

Unfilled, low-viscosity, clear amber epoxy adhesive that can be spread easily in thin films that are almost transparent after curing.

Excellent general purpose aerosol release agent for making molds and casting parts.

Versatile liquid release agent that is used for a variety of general mold making and casting applications.

Wax-based non-silicone release agent. Effective when used to release polyurethane foams elastomers.

Translucent, shore 000-34 hardness platinum cure silicone rubber. 20 minute pot life and 50 minute cure time.

Translucent, shore 00-10 hardness platinum cure silicone rubber. 30 minute pot life and 4 hour cure time.

Translucent, shore 00-20 hardness platinum cure silicone rubber. 30 minute pot life and 4 hour cure time.

Translucent, shore 00-20 hardness platinum cure silicone rubber. 20 minute pot life and 1 hour cure time.

Translucent, shore 00-30 hardness platinum cure silicone rubber. 45 minute pot life and 4 hour cure time.

Water Clear Translucent, shore 00-31 hardness platinum cure silicone rubber. 40 minute pot life and 4 hour cure time.

Translucent, shore 00-35 hardness platinum cure silicone rubber. 2.5 minute pot life and 5 minute cure time.

Water Clear Translucent, shore 00-45 hardness platinum cure silicone rubber. 45 minute pot life and 4 hour cure time.

Translucent, shore 00-50 hardness platinum cure silicone rubber. 18 minute pot life and 3 hour cure time.

Translucent, shore 00-50 hardness platinum cure silicone rubber. 1 minute pot life and 5 minute cure time.

Translucent, shore 000-35 hardness platinum cure silicone rubber. 15 minute pot life and 2 hour cure time.

Economical Shore 60A urethane rubber, 1A:1B mix ratio by volume, 6 minute pot life and 4 hour handling time.

Economical Shore 80A urethane rubber, 1A:1B mix ratio by volume, 13 minute pot life and 24 hour cure time.

Electric dispensing gun for Smooth-On product packaged in 400 ml cartridges

Water clear platinum silicone rubber developed for special effects, encapsulation and display applications.

A clear, water like thinning agent that is used for lowering the viscosity Smooth-On epoxies.

Mineral filled general purpose casting epoxy. Pot life of 20 minutes and cure time of 1 hour. Base and Hardener sold separately.

Mineral filled general purpose casting epoxy. Pot life of 90 minutes and cure time of 4 hours. Base and Hardener sold separately.

Mineral filled general purpose casting epoxy. Pot life of 3.5 hours and cure time of 24 hours. Base and Hardener sold separately.

Mineral filled general purpose casting epoxy. Pot life of 3 hours and cure time of 24 hours followed by heat cure. Base and Hardener sold separately.

A black mineral filled general purpose casting epoxy. Pot life of 20 minutes and cure time of 1 hour. Base and Hardener sold separately.

A black mineral filled general purpose casting epoxy. Pot life of 90 minutes and cure time of 4 hours. Base and Hardener sold separately.

A black mineral filled general purpose casting epoxy. Pot life of 3.5 hours and cure time of 24 hours. Base and Hardener sold separately.

A black mineral filled general purpose casting epoxy. Pot life of 3 hrs and cure time of 24 hrs followed by heat cure. Base and Hardener sold separately.

Aluminum filled casting epoxy. Pot life of 30 minutes and cure time of 3 hours. Base and Hardener sold separately.

Aluminum filled casting epoxy. Pot life of 75 minutes and cure time of 9 hours. Base and Hardener sold separately.

Aluminum filled casting epoxy. Pot life of 3.5 hours and cure time of 24 hours. Base and Hardener sold separately.

Aluminum filled casting epoxy. Pot life of 4 hours and cure time of 24 hours followed by heat cure. Base and Hardener sold separately.

High temperature castable epoxy. Pot life of 3 hours and cure time of 24 hours followed by heat cure.

UV resistant clear casting epoxy. Pot life of 5 hours, cure time of 24 hours and a maximum casting thickness up to 3/8” (0.95 cm). See Technical Bulletin.

UV resistant clear casting epoxy. Pot life of 12 hours, cure time of 72 hours and a maximum casting thickness up to 2” (5.08cm). See Technical Bulletin.

A gray thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

Slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required).

A neutral color thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

A red thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

A white thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

Easy-to-use liquid epoxy laminating system. 4A:1B by volume. Pot life 11 min cure time 6-8 hrs.

Easy-to-use liquid epoxy laminating system. 3A:1B by volume. Pot life 22 min cure time 15 hrs.

Easy-to-use liquid epoxy laminating system. 3A:1B by volume. Pot life 55 min cure time 24 hrs.

Water clear, UV resistant laminating epoxy with a heat resistance up to 300°F / 149°C when properly cured.

Easy-to-use white liquid epoxy system. Pot life 20 min, thin film working time 45 min cure time 15 hrs. Base and Hardener sold separately.

Easy-to-use white liquid epoxy system. Pot life 62 min, thin film working time 120 min cure time 24 hrs. Base and Hardener sold separately.

A thixotropic epoxy coating that self thickens for brushing. Cured material is easily sanded, primed and painted.

Impact resistant EPS foam coating. Offers a longer working time compared to Epsilon™ and cures semi-rigid.

Shore A 35 hardness platinum cure silicone rubber putty. 1 minute pot life and 7 minute cure time.

Shore A 38 hardness platinum cure silicone rubber putty. 4 minute pot life and 30 minute cure time.

Shore A 40 hardness platinum cure silicone rubber putty. 30 minute pot life and 4 hour cure time.

Brushable Shore A 40 hardness urethane rubber, 1A:1B mix ratio by volume, 18 minute pot life and 16 hour cure time.

Brushable platinum cure silicone developed especially for making high performance, reusable vacuum bags.

Cures quickly to a strong, lightweight and impact resistant 12lb. (approx.) rigid foam.

Used when spraying low viscosity materials such as EZ-Spray™ Plastic, StyroCoat™ or EZ-Spray™ Foams - Bag contains 10 flow restrictors.

LARGE static mixing tip for spraying EZ~Spray™ silicone rubber.

SMALL static mixing tip for spraying EZ~Spray™ plastics, foams and urethane rubber.

Spray system for spraying 1500 ml cartridges of EZ‑Spray™ coating, mold making and casting materials for large projects.

Sprayable platinum cure silicone developed especially for making high performance, reusable vacuum bags. 20 minute cure time.

Sprayable platinum cure silicone developed especially for making fast rubber molds onto large or vertical surface areas. 1 hour cure time.

Flame-Rated (E-84) sprayable polyurethane plastic formulated to economically coat a variety of surfaces.

Cure accelerator formulated specifically for Mold Max™ 30 silicone.

Heavily filled low-density urethane casting resin. Cured plastic is lightweight (it floats in water!) and has a much lower density than other casting resins.

A clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some Smooth-On epoxies.

14-lb. flexible polyurethane pourable expanding foam. 1A:2B by volume mix ratio.

15-lb. flexible polyurethane pourable expanding foam. 1A:2B by volume mix ratio.

17-lb. flexible polyurethane pourable expanding foam. 1A:2B by volume mix ratio.

23-lb. flame rated flexible polyurethane Foam. 85A:100B by weight mix ratio - scale required

25-lb. flexible polyurethane pourable expanding foam. 1A:2B by weight mix ratio - scale required.

6-lb. flexible polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

7-lb. flexible polyurethane pourable expanding foam. 1A:1B by volume mix ratio - certifies to FMVSS-302 flame rating.

3-lb. flexible polyurethane pourable expanding foam. 1A:2B By volume mix ratio

4-lb. flexible polyurethane pourable expanding foam. 80A:100B by weight mix ratio - scale required

5-lb. flexible polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

8-lb. flexible polyurethane pourable expanding foam. 1A:2B by volume mix ratio

10-lb. flexible polyurethane pourable expanding foam. 1A:1B by volume mix ratio

Shore A 20 hardness polysulfide rubber mold compound, 100A:12B mix ratio by weight - scale required, 50 minute pot life 16 hour cure time.

Shore A 15 hardness polysulfide rubber mold compound, 100A:12B mix ratio by weight - scale required, 50 minute pot life 16 hour cure time.

Shore A 12 hardness polysulfide rubber mold compound, 100A:12B mix ratio by weight - scale required, 90 minute pot life 16 hour cure time.

10-lb. rigid polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

10-lb. rigid polyurethane pourable expanding foam. SLOW set time. 1A:1B by volume mix ratio.

15-lb. rigid polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

26-lb. rigid polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

3-lb. rigid polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

4-lb. rigid polyurethane pourable expanding foam. 1A:1B by volume mix ratio.

4-lb. rigid polyurethane foam. 1A:1B by volume mix ratio - Color: BLACK

5-lb. rigid polyurethane pourable expandable foam. 1A:1B by volume mix ratio

8-lb. machinable polyurethane pourable expanding foam. 2A:1B by weight mix ratio - scale required.

Flame rated (ASTM E-84, Class A) polymer additive for alpha gypsum. KIT INCLUDES: 40# VF-812, 8# MF-415, 176 grams Hardener (no Alpha Gypsum or optional E-Glass).

Flame rated (ASTM E-84, Class A) polymer additive for alpha gypsum. KIT INCLUDES: 7# VF-812, 1# MF-415, 22gram Hardener, 10# FGR-95, & 1# Chopped E-Glass.

World-wide standard concrete Acrylic Co-Polymer additive for making lightweight GFRC, Glass Fiber Reinforced Concrete, panels

Extremely lightweight epoxy putty 1A:1B by volume mix ratio. Suitable for an infinite variety of applications.

Extremely lightweight epoxy putty that offers fast handling time. 1A:1B by volume mix ratio.

Flame Rated (E84, Class A) lightweight epoxy putty 1A:1B by volume mix ratio.

Extremely lightweight epoxy putty that offers high temperature resistance. 2A:1B by volume mix ratio.

Sculpting enhancement fluid for Free Form™ SCULPT, makes sculpting epoxy easier.

A mix-by-hand black epoxy putty that is used to create textured or highly detailed display pieces.

A high density epoxy sculpting putty that is flame rated (E84, Class A).

Flame rated (E84, Class A) flexible mix-by-hand epoxy dough with excellent impact and abrasion resistance.

Extremely hard and durable high density epoxy sculpting dough-Crystalline Silica Free; 1A:1B mix ratio by volume.

Phosphorescent powders can be added to liquid plastics, rubbers and foams to create castings that glow in the dark after being charged with light.

The industry standard for making a fast, strong support shell specially in lifecasting applications.

Filled, two component (A+B) epoxy that can be cast solid or thickened for vertical surface applications.

Used to thicken, reduce stickiness, and reduce sag in Free Form™ Habitat™ making the epoxy more handleable.

Non-toxic, skin conditioning liquid that is mixed with Body Double™ silicone mold rubber prior to applying rubber to the skin.

Liquid fluorescent colorants compatible with Smooth-On urethane rubbers, urethane plastics and urethane foams (rigid and flexible).

water soluble release agent will aid in releasing concrete or gypsum plaster castings from rubber molds

Stops cure inhibition when casting platinum cured silicone rubbers.

Accelerate the cure time of some Smooth-On urethane liquid rubber products without significantly affecting the ultimate physical properties.

Economical alternative to aerosols for dispensing release agents and sealing agents.

Fast-setting shore A 40 hardness urethane elastomer, 1A:1B mix ratio by volume, 2.5 minute pot life and 30 minute handling time.

Fast-setting shore A 60 hardness urethane elastomer, 1A:1B mix ratio by volume, 2.5 minute pot life and 20 minute handling time.

Fast-setting shore A 90 hardness urethane elastomer, 100A:120B mix ratio by weight - scale required, 2.5 minute pot life and 20 minute handling time.

Includes everything you need to make a mold of a hand. Reproduce fine detail and make an excellent temporary mold – good for one reproduction.

Dispensing gun for Smooth-On product packaged in 200 ml or 400 ml cartridges

An “all-powder” alternative to our original Matrix™ NEO powder/liquid system. Mix ratio of 3 parts Dryve™ powder to 1 part water by volume.

Chopped glass fibers used with duoMatrix-G™ , C™ and NEO™ to make elements that are thin, lightweight and exceptionally strong.

Powerful epoxy adhesive used for hundreds of industrial bonding applications and offers excellent adhesion to porous or non-porous surfaces.

Plastic mixing containers with graduated markings for accurate measurement of materials which are measured by volume.

Shore A 10 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Translucent tin cured silicone rubber - Shore A 10 hardness 100:10 mix ratio by weight - scale required.

Low viscosity, Shore A 15 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Translucent tin cured silicone rubber - Shore A 15 hardness 100:10 mix ratio by weight - scale required.

Shore A 20 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Shore A 25 hardness tin cure silicone rubber. 100:5 mix ratio by weight - scale required.

Translucent tin cured silicone rubber - Shore A 27 hardness 100:10 mix ratio by weight - scale required.

Low viscosity, Shore A 29 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Shore A 30 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Shore A 40 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Heat resistant (up to 560°F/294°C), Shore A 60 hardness tin cure silicone rubber. 100:3 mix ratio by weight - scale required.

Brushable, Shore A 30 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.

Low shrinkage, tin cured silicone rubber - Shore A 30 hardness 100:10 mix ratio by weight - scale required.

Translucent, low viscosity, shore A 14 hardness platinum cure silicone rubber. 3 minute pot life and 9 minute cure time.

Low viscosity, shore A 15 hardness platinum cure silicone rubber. 50 minute pot life and 4 hour cure time.

Low viscosity, shore A 16 hardness platinum cure silicone rubber. 6 minute pot life and 30 minute cure time.

Translucent, low viscosity, shore A 19 hardness platinum cure silicone rubber. 3 minute pot life and 12 minute cure time.

Translucent, low viscosity, shore A 20 hardness platinum cure silicone rubber. 6 minute pot life and 30 minute cure time.

Low viscosity, shore A 30 hardness platinum cure silicone rubber. 45 minute pot life and 6 hour cure time.

Translucent, low viscosity, shore A 31 hardness platinum cure silicone rubber. 5 minute pot life and 23 minute cure time.

Premium performance epoxy for applications requiring maximum holding power and water resistance.

Nickel silver powder for metal cold casting effects.

Zero-VOC low viscosity silicone solvents that evaporate quickly, used for thinning silicone paints or surface coatings.

Zero-VOC low viscosity silicone solvents that evaporate quickly, used for thinning silicone paints or surface coatings.

Convenient, economical liquid sealing agent and release agent in one.

Low viscosity, shore A 25 hardness tin cure silicone rubber. 1:1 mix ratio by volume 75-minute cure.

Low viscosity, shore A 30 hardness tin cure silicone rubber. 1:1 mix ratio by volume, 6-hour cure.

Two-component, black epoxy resin compound designed to join, bond and caulk sections of laboratory counters and tables.

Petroleum Jelly is a porous surface sealer/release for use with Smooth-On Silicone Rubber products.

Fiber resin designed for vertical surface application. Part A is a liquid and Part B is a paste. 1A:3B mix ratio by volume, 10 minute pot life 90 minute cure time.

Trowelable support shell plastic. 2A:1B by volume mix ratio - no scale required.

Fiber resin designed for vertical surface application. Part A is a liquid and Part B is a paste. 1A:2B mix ratio by volume, 10 minute pot life 90 minute cure time.

Accelerate the cure time of platinum silicone rubber products without significantly affecting the ultimate physical properties.

Shore A 30 hardness urethane rubber. DRY formula, 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 30 hardness urethane rubber. WET formula, 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 50 hardness urethane rubber. WET formula, 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 40 hardness urethane rubber, 100A:10B by weight - scale necessary, 20 minute pot life and 16 hour cure time.

Shore A 44 hardness urethane rubber, 2A:1B mix ratio by volume, 15 minute pot life and 16 hour cure time.

Shore A 60 hardness urethane rubber, 2A:1B mix ratio by volume, 15 minute pot life and 16 hour cure time.

Shore A 70 hardness urethane rubber, 2A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 80 hardness urethane rubber, DRY formula, 2A:1B mix ratio by volume, 25 minute pot life and 48 hour cure time.

Shore A 80 hardness urethane rubber, WET formula, 2A:1B mix ratio by volume, 25 minute pot life and 48 hour cure time.

Shore A 90 hardness urethane rubber, 2A:1B mix ratio by volume, 20 minute pot life and 48 hour cure time.

Everything you need to make your first one or two piece silicone block mold and resin casting.

Mix & Apply-By-Hand Shore A 40 hardness tin cure silicone rubber putty. 20A:1B mix ratio by volume, 30‑minute cure.

Translucent clear platinum-cure silicone that is used to make a base for color pigmenting on cured platinum silicone rubber.

Single component liquid that can be used as a bald cap plastic or for encapsulating silicone gel prosthetic appliances.

Granite FX Fillers can be added to some Smooth-Cast™ liquid plastics or liquid rubbers to create realistic stone effects in finished castings.

Brushable, shore A 25 platinum silicone rubber, 1A:1B Mix Ratio By Volume.

Brushable, shore A 40 platinum silicone rubber, 1A:1B Mix Ratio By Volume.

Shore A 20 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 30 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 40 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 50 hardness urethane rubber. 1A:1B mix ratio by volume, 50 minute pot life and 16 hour cure time.

Shore A 60 hardness urethane rubber. 1A:1B mix ratio by volume, 50 minute pot life and 16 hour cure time.

Water clear platinum silicone rubber developed for special effects and display applications, making Flexible Glass & Ice Effects.

Thixotropic plastic that self thickens when mixed and can be brushed. 1A:4B mix ratio by volume, 3 minute pot life 60 minute cure time.

Thixotropic plastic that self thickens when mixed and can be brushed. 1A:4B mix ratio by volume, 8 minute pot life 5 hour cure time.

Two-part pourable liquid silicone adhesive that is applied to natural or synthetic fabric/clothing for the purpose of keeping sports or leisure wear in place during exercise.

One component silicone rubber adhesive for bonding RTV silicone rubber to silicone rubber and other substrates. Cured silicone is certified skin safe.

Concentrated pigments for tin and platinum silicone rubber.

Concentrated fluorescent pigments for tin and platinum silicone rubber.

Non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone rubber products.

Fast-setting shore A 60 hardness urethane elastomer, 1A:1B mix ratio by volume, 4 minute pot life and 2 hour handling time.

Fast-setting shore A 80 hardness urethane elastomer, 100A:60B mix ratio by weight, 15 minute pot life and 4 hour handling time.

Fast-setting shore A 85 hardness urethane elastomer, 85A:100B mix ratio by weight - scale required, 4 minute pot life and 2 hour handling time.

Skin safe silicone used to create fast wounds, scars and to adhere skin effect appliances directly to the skin.

Change the “feel” of platinum silicone rubber to a softer and more “flesh-like” material.

Additive for addition cure silicone rubber that creates a cured silicone piece with greatly reduced surface tension.

Extend the pot life of platinum silicone rubber products and Soama Foama™ silicone foam without affecting the ultimate physical properties.

Urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). water clear and, once fully cured, shatters like glass.

Fast-setting bright white low viscosity liquid plastic. 1A:1B by volume mix ratio. 3 minute pot life and 10 minute cure time.

Ultra fast-setting bright white low viscosity liquid plastic. 1A:1B by volume mix ratio. 30 second pot life and 5 minute cure time.

Bright white low viscosity liquid plastic. 1A:1B by volume mix ratio. 7 minute pot life and 30 minute cure time.

Bright white low viscosity liquid plastic. 1A:1B by volume mix ratio. 15 minute pot life and 4 hour cure time.

Fast-setting off-white low viscosity liquid plastic. 1A:1B by volume mix ratio. 3 minute pot life and 10 minute cure time.

Medium-setting off-white low viscosity liquid plastic. 1A:1B by volume mix ratio. 9 minute pot life and 30 minute cure time.

Slow-setting off-white low viscosity liquid plastic. 1A:1B by volume mix ratio. 15 minute pot life and 4 hour cure time.

Fast-setting clear amber liquid plastic. 1A:1B by volume mix ratio. 2.5 minute pot life and 10 minute cure time.

Medium-setting clear amber liquid plastic. 1A:1B by volume mix ratio. 9 minute pot life and 60 minute cure time.

Slow-setting clear amber liquid plastic. 1A:1B by volume mix ratio. 20 minute pot life and 4 hour cure time.

A tan medium-setting, high density casting resin. 1A:1B mix ratio by volume. 6 min pot-life and 60 min cure time.

Slow-setting, beige high density casting resin. 1A:5B by weight mix ratio - scale required. Pot life 20 min and cure time 2 hrs.

Semi-rigid, impact resistant shore 45D liquid plastic. 1A:1B mix ratio by volume. 5 min pot-life and 30 min cure time.

Semi-rigid, impact resistant shore 57D liquid plastic. 1A:1B mix ratio by volume. 3 min pot-life and 30 min cure time.

Semi-rigid, impact resistant shore 60D liquid plastic. 1A:1B mix ratio by volume. 5 min pot-life and 30 min cure time.

Semi-rigid, impact resistant shore 61D liquid plastic. 1A:1B mix ratio by volume. 7 min pot-life and 60 min cure time.

Gel-curing bright white liquid plastic for roto-casting. 1A:1B mix ratio by volume. 2.5 min pot-life and 15 min cure time.

Grey semi-rigid; impact resistant shore 66D liquid plastic. 1A:1B mix ratio by volume. 7 min pot-life and 60 min cure time.

Fast-setting BLACK low viscosity liquid plastic. 1A:1B by volume mix ratio. 2.5 min pot-life and 15 min cure time.

Medium-setting BLACK low viscosity liquid plastic. 1A:1B by volume mix ratio. 5 min pot-life and 90 min cure time.

Shore A 33 platinum silicone rubber, 45 minute pot life and 6 hour cure time. 1A:1B Mix Ratio By Volume.

Shore A 36 platinum silicone rubber, 60 minute pot life and 24 hour cure time. 100A:10B Mix Ratio By Weight - Scale Required.

Shore A 40 platinum silicone rubber, 30 minute pot life and 24 hour cure time. 100A:10B Mix Ratio By Weight - Scale Required.

Shore A 45 platinum silicone rubber, 25 minute pot life and 6 hour cure time. 1A:1B Mix Ratio By Volume.

Shore A 50 platinum silicone rubber, 45 minute pot life and 18 hour cure time. 100A:10B Mix Ratio By Weight - Scale Required.

Shore A 60 platinum silicone rubber, 45 minute pot life and 16 hour cure time. 100A:10B Mix Ratio By Weight - Scale Required.

Additive designed to accelerate the cure time of some urethane liquid plastics without significantly affecting ultimate physical properties.

Lower the cured durometer of a variety of Smooth-On flexible polyurethane products.

Concentrated colorants for liquid urethane rubber, urethane plastic or urethane foam.

Low viscosity, clear and colorless liquid platinum cure silicone rubber.

15-lb. soft, platinum silicone pourable expanding foam. 1A:1B by volume mix ratio.

25-lb. soft, platinum silicone pourable expanding foam. 1A:1B by volume mix ratio.

Soft paste wax suitable for sealing porous surfaces prior to applying Smooth-On mold rubber.

Water clear translucent, shore A 12 hardness platinum cure silicone rubber. 40 minute pot life and 12 hour cure time, 1A:1B Mix Ratio By Volume.

Water clear translucent, shore A 18 hardness platinum cure silicone rubber. 60 minute pot life and 24 hour cure time, 100A:10B Mix Ratio By Weight - Scale Required.

Water clear translucent, shore A 37 hardness platinum cure silicone rubber. 25 minute pot life and 4 hour cure time, 1A:1B Mix Ratio By Volume.

Water clear translucent, shore A 40 hardness platinum cure silicone rubber. 60 minute pot life and 16 hour cure time, 100A:10B Mix Ratio By Weight - Scale Required.

Used along with a dispensing gun to mix material in 400 ml. cartridges - Bag of 10.

Slow color change and physical degradation due to UV exposure for many Smooth-On liquid urethane products.

Two component, clear amber adhesive designed to provide rapid bonding.

Economical, fast-drying sealing agent for a variety of porous surfaces including gypsum plasters, concrete and wood.

A UV resistant clear liquid epoxy that can be poured over a variety of surfaces to provide a strong, high gloss coating.

Semi-rigid plastic that is strong and very tough. 100A:100B by weight mix ratio - scale required. 20 minute pot life and 16 hour cure time.

Semi-rigid resin with extraordinary handling strength and impact resistance. 100A:44B by weight mix ratio - scale required. 20 minute pot life and 16 hour cure time.

Black semi-rigid high strength urethane casting resins, 100A:120B by weight mix ratio - scale required, 3 minute pot life and 20 minute cure time.

Black semi-rigid high strength urethane casting resins, 100A:120B by weight mix ratio - scale required, 10 minute pot life and 45 minute cure time.

Urethane resin with high impact resistance developed for machine rotocasting, 75A:100B by weight mix ratio - scale required. 6 minute pot life and 60 minute cure time.

Fast-setting Shore 80A/30D urethane plastic. 1A:2B by weight mix ratio - scale required. 6 minute pot life and 90 minute handling time.

Aluminum filled urethane casting resin for making short run vacuum forming molds. 26A:100B by weight mix ratio - scale required. 20 minute pot life and 16 hour cure time.

Low viscosity, high performance white casting resins. 1A:1B by volume mix ratio. 7 minute pot life and 60 minute cure time.

Urethane casting resin with high ABS-type compressive and flexural strength. 2A:1B by volume mix ratio. 6 minute pot life and 60 minute cure time.

Low viscosity, high performance white casting resins. 1A:1B by volume mix ratio. 20 minute pot life and 90 minute cure time.

Very strong when cast in Ultra-Thin sections, 100A:100B by weight mix ratio - gram scale required. 20 minute pot life and 16 hour cure time.

Low cost, high performance tan casting resins, .1A:1B by volume mix ratio. 3 minute pot life and 15 minute cure time.

Low cost, high performance tan casting resins, .1A:1B by volume mix ratio. 7 minute pot life and 75 minute cure time.

Low viscosity, fast set casting resin that meets UL 94 V-O for flame resistance. 1A:1B by volume mix ratio. 2.5 minute pot life and 10 minute cure time.

Heat resistant resin up to 263°F /129°C. 1A:1B by volume mix ratio. 2.5 minute pot life and 15 minute cure time.

Clear amber urethane casting resin that features very high compressive and tensile strength, 1A:1B by volume mix ratio. 7 minute pot life and 60 minute cure time.

Liquid additive that thickens most Smooth-On mold making silicones for vertical surface application (making brush-on molds).

Used to mix two-part compounds fast by attaching the mixer to any variable speed drill.

Ultimate Blood™ Base is the base red blood for the Ultimate Blood™ system.

Blue Color Adjuster for Ultimate Blood™ system.

Includes everything for amazing blood effects. Perfectly simulates human blood in how it looks and flows.

Red Color Adjuster for Ultimate Blood™ system.

Thinner for the Ultimate Blood™ base. Thin down previously thickened Ultimate Blood™ to a very low viscosity blood.

Thickening agent for Ultimate Blood™ base. Thickens the blood up to a paste like consistency,

Yellow Color Adjuster for Ultimate Blood™ system.

Experience making your own hyper-realistic vine that is durable, UV resistant and long-lasting for indoor or outdoor displays and exhibits.

Includes Skin Tite on-skin silicone as well as the accessories you need to create highly realistic wounds fast.

Includes Skin Tite on-skin silicone as well as the accessories you need to create Multiple Zombie Makeup Effects.

Release agent formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products.

URE-BOND™ 90 is a two-component, slightly expanding urethane adhesive that offers a strong, rigid bond between many different surfaces.

Flexible urethane adhesive. 1A:1B mix ratio by volume, 5 minute pot life 24 hour cure time.

Fiber-based filler that can be added to Smooth-On urethane and silicone rubbers, urethane plastics and epoxies to thicken for brush-on applications.

Create casting effects or thicken liquid material for trowelable casting applications. Added in small amounts until the desired viscosity is achieved.

Micro-balloons that can be added to Smooth-On urethane plastics and epoxies to create very light weight castings.

Pure aluminum pellet fillers can be used with resins to improve thermal conductivity, dimensional stability, reduce shrinkage, etc. (400 micron)

Pure aluminum pellet fillers can be used with resins to improve thermal conductivity, dimensional stability, reduce shrinkage, etc. (1200 micron)

Added to urethane resins and castable epoxies to reduce cost. Recommended starting mix ratio is 1A to 1B to 1 part URE-FIL™ 3.

Best choice for creating a wood grain effect. Mix 1 part filler with 1A:1B of Smooth-Cast™ 320 resin and cast into mold.

Improve castable plastic dimensional stability or create marble effects. Maximum ratio before compromising the physical properties is 1A:1B to 2 parts filler.

Create casting effects or thicken liquid material for trowelable casting applications. Added in small amounts until the desired viscosity is achieved.

Brushable shore A 70 urethane coating, 100A:10B mix ratio by weight - scale required, 8 minute pot life, 30 minute re-coat, 16 hour cure.

Concentrated, phthalate-free color pigments that resist ultraviolet light for urethane and epoxy. These pigment dispersions will yield opaque castings.

Shore A 10 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 24 hour cure time.

Shore A 20 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 30 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 40 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 45 hardness urethane rubber. 1A:1B mix ratio by volume, 30 minute pot life and 16 hour cure time.

Shore A 50 hardness urethane rubber. 1A:1B mix ratio by volume, 60 minute pot life and 16 hour cure time.

Shore A 60 hardness urethane rubber. 1A:1B mix ratio by volume, 60 minute pot life and 16 hour cure time.

XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts.

Dry gas blanket designed to extend the shelf life of unused moisture sensitive polyurethane products.