Mold MaxTM 60
For Industrial Use Only.
Keep Out of the Reach of Children.
Product Packaging May Vary.
Description
Mold Max™ 60 is a Shore 60A tin catalyzed silicone mold rubber formulated for applications requiring high heat resistance (up to 560°F/294°C). It features a low mixed viscosity and cured rubber exhibits very low linear shrinkage. Parts A and B are mixed 100A : 3B by weight. Pot life is 40 minutes and cure time is 24 hours. Applications include making foundry patterns, flat pattern reproductions and casting low-melt metal alloys such as tin and pewter.
Important: you must weigh Part A and B components using a gram scale to be successful with Mold Max™ silicones.
Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.
- Developed for high-heat resistance applications and will withstand up to 560°F / 294°C
- Features a low mixed viscosity and cured rubber exhibits very low linear shrinkage
Shopping Tools
Moldmaking & Casting Calculators
Estimating the amount of material needed for a project can be a difficult task. Not having enough material or having too much left over is not only frustrating, but costly. To assist you with these calculations, we are happy to provide the following tools.
Contact Technical Help for Assistance
Technical help is a free service offered by Smooth-On, Inc. to assist end-users of rubbers, plastics, foams and other materials in realizing their project objectives.