Maker Pro PaintTM FLEX Additive
For Industrial Use Only.
Keep Out of the Reach of Children.
Product Packaging May Vary.
Description
FOR PAINTING FLEXIBLE SUBSTRATES & SURFACES: (Note: Sanding Not Required)
Painting flexible surfaces (like fabrics, urethane/latex rubbers, or flexible foams) requires the paint to “flex” with the substrate.
Mix FLEX Additive with Maker Pro Paint™ in a mix ratio of 1:1 by volume to make the paint:
- a) bond to flexible surfaces
- b) more elastic
- c) highly resistant to cracking and peeling - even when the painted object is subject to bending, pulling, twisting, etc.
BEST PRACTICE:
Always mix FLEX Additive and Maker Pro Paint™ thoroughly to a uniform consistency using a flat edge paint stirrer.
NOTE: FLEX Additive is translucent white and will have no effect on final color once the paint dries.
Shopping Tools
Moldmaking & Casting Calculators
Estimating the amount of material needed for a project can be a difficult task. Not having enough material or having too much left over is not only frustrating, but costly. To assist you with these calculations, we are happy to provide the following tools.
Contact Technical Help for Assistance
Technical help is a free service offered by Smooth-On, Inc. to assist end-users of rubbers, plastics, foams and other materials in realizing their project objectives.