Turbine Mixer
For Industrial Use Only.
Keep Out of the Reach of Children.
Product Packaging May Vary.
Description
Turbine Mixers can be used to mix two-part compounds fast by attaching the mixer to any variable speed drill.
Some Considerations When Working With Turbine Mixers...
~ While mixing two components of a material together using a Turbine Mixer is effective, we still recommend scraping the sides and bottom of the mixing container with a straight-edge spatula to make sure there is no unmixed material left in the mixing container.
~ Using a variable speed drill with a Turbine Mixer attached to blend materials WILL whip air into the mixture. Air in the mixture could yield bubbles in the material after it has fully cured; usually bubbles are not desired. So if using a Turbine Mixer to blend Parts A & B together, it is recommended to Vacuum Degass the mixed material prior to pouring to reduce the amount of air in the rubber.
Shopping Tools
Moldmaking & Casting Calculators
Estimating the amount of material needed for a project can be a difficult task. Not having enough material or having too much left over is not only frustrating, but costly. To assist you with these calculations, we are happy to provide the following tools.
Contact Technical Help for Assistance
Technical help is a free service offered by Smooth-On, Inc. to assist end-users of rubbers, plastics, foams and other materials in realizing their project objectives.